Configuring The Hostname - Siemens RX1500 User Manual

Chapter 4
System Administration
3. Configure the following parameter(s) as required:
Parameter
System Name
Location
contact
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 4.2

Configuring the Hostname

To configure the hostname for the device, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
Navigate to admin. The Hostname form appears.
2.
Figure 197: Hostname Form
1. Name Box 2. Domain Box
3. Configure the following parameter(s) as required:
Parameter
name
186
Description
Default: System Name
An administratively-assigned name for this managed node. By convention, this is the
node's fully-qualified domain name. If the name is unknown, the value is the zero-length
string.
Default: Location
The physical location of this node (e.g., 'telephone closet, 3rd floor'). If the location is
unknown, the value is the zero-length string.
Default: Contact
The textual identification of the contact person for this managed node, together with
information on how to contact this person. If no contact information is known, the value
is the zero-length string.
1
2
Description
Default: ruggedcom
The hostname that is the name of this device.
RUGGEDCOM ROX II
User Guide
Configuring the Hostname