Installing Files - Siemens RX1500 User Manual

Chapter 3
Device Management
Section 3.14.1

Installing Files

To install a file on the device, do the following:
1. If the source of the file is a USB Mass Storage drive, insert the drive in the USB port on the device.
2. Navigate to admin and click install-files in the menu. The Install Files and Trigger Action forms appear.
Figure 74: Install Files Form
1. File Type List
Figure 75: Trigger Action Form
1. Perform Button
3. On the Install Files form, configure the following parameters:
Parameter
file-type
url
4. On the Trigger Action form, click Perform.
76
2. URL Box
Description
Synopsis: config, featurekey
The file types to be copied.
The URL of the ROX file to copy. SCP, SFTP, FTPS, FTP, and HTTP are supported for
the file transfer. To install from a USB device, the format is 'usb://path-to-file-on-system'
and only one single partition is supported. For the rest of the protocols, the format is
'protocol://user:password@host:port/path-to-file'. If 'port' is not specified, the default port
for the protocol is used.
RUGGEDCOM ROX II
User Guide
1
Installing Files