Configuring Radius Authentication For Switched Ethernet Ports - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Parameter
address
port-udp
password
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
4.
to proceed.
Click Exit Transaction or continue making changes.
5.
Section 4.8.3
Configuring RADIUS Authentication for Switched Ethernet
Ports
To configure RADIUS authentication for switched Ethernet ports, do the following:
IMPORTANT!
Passwords are case-sensitive.
Change the mode to Edit Private or Edit Exclusive.
1.
2. Navigate to switch » port-security » radius. The Primary Radius Server and Secondary Radius Server
forms appear.
Figure 230: Primary Radius Server Form
1. Address Box
Configuring RADIUS Authentication for Switched Ethernet
Ports
Description
The IPv4 address of the server.
Default: 1812
Synopsis: The aes-cfb-128-encrypted-string works exactly like des3-cbc-encrypted-
string but AES/128bits in CFB mode is used to encrypt the string. The prefix for
encrypted values is '$4$'.
1
2
3
2. Port UDP Box 3. Password Box
Chapter 4
System Administration
217