Chapter 5
Setup and Configuration
Section 5.15.15
Managing IP Ranges for IP Pools
The following sections describe how to configure and manage IP ranges for IP pools:
•
Section 5.15.15.1, "Viewing a List of IP Ranges for IP Pools"
•
Section 5.15.15.2, "Adding an IP Range to an IP Pool"
•
Section 5.15.15.3, "Deleting an IP Range From an IP Pool"
Section 5.15.15.1
Viewing a List of IP Ranges for IP Pools
To view a list of IP ranges configured for an IP pool, navigate to services » dhcpserver » subnet » {name} »
options » ippool » {description} » iprange, where {name} is the name of the subnet and {description} is the
name of the IP pool. If ranges have been configured, the IP Range Configuration table appears.
Figure 388: IP Range Configuration Table
If no IP ranges have been configured, add ranges as needed. For more information, refer to
"Adding an IP Range to an IP
Section 5.15.15.2
Adding an IP Range to an IP Pool
To add an IP range to an IP pool, do the following:
1.
Change the mode to Edit Private or Edit Exclusive.
2.
Navigate to services » dhcpserver » subnet » {name} » options » ippool » {description} » iprange,
where {name} is the name of the subnet and {description} is the name of the IP pool.
3.
Click <Add iprange>. The Key Settings form appears.
356
Pool".
RUGGEDCOM ROX II
User Guide
Section 5.15.15.2,
Managing IP Ranges for IP Pools