Configuring The System Time And Date - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
8. If required, add server authentication keys. For more information, refer to
Server Key".
9. Add restrictions for the remote NTP servers. For more information, refer to
Server Restriction".
10. Enable the NTP service. For more information, refer to
11. View the status of the NTP service. For more information, refer to
Status".
Section 5.12.2

Configuring the System Time and Date

To configure the system time and date, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to admin and click set-system-clock in the menu. The Set New Time and Date and Trigger
Action forms appear.
Figure 288: Set New Time and Date Form
1. Time Box
Figure 289: Trigger Action Form
1. Perform Button
3. On the Set New Time and Date form, configure the following parameter(s) as required:
Parameter
time
280
1
Description
Enter the date and time in the format YYYY-MM-DD HH:MM:SS.
Section 5.12.13.2, "Adding a
Section 5.12.14.2, "Adding a
Section 5.12.7, "Enabling/Disabling the NTP
Section 5.12.8, "Viewing the NTP Service
Configuring the System Time and Date
RUGGEDCOM ROX II
User Guide
Service".
1