Managing Passwords And Passphrases - Siemens RX1500 User Manual

Chapter 4
System Administration
1
2
Figure 238: Users Screen
1. List of Users
2. Type a message in the Message box and click Send.
Section 4.10

Managing Passwords and Passphrases

ROX II requires separate passwords or passphrases for logging into the various device modes, such as normal,
boot, service and maintenance modes. Default passwords are configured for each user type initially. It is strongly
recommended that these be changed before the device is commissioned.
For a list of default passwords, refer to
The complexity of each password/passphrase can be chosen by the user or enforced through the device by an
administrator. If a user's password/passphrase does not meet the password requirements, an alarm is generated.
Figure 239: Example – Password Too Short Alarm
224
2. Send Button 3. Kick Icon
Section 2.2, "Default Usernames and
4. Messages Window 5. Message Box
RUGGEDCOM ROX II
6. Clear History Button
Passwords".
Managing Passwords and Passphrases
User Guide
3
4
5
6