Siemens RX1500 User Manual page 810

Chapter 5
Setup and Configuration
Parameter
mark
mask
chain-options
Configuring a Modify Mark
1. In the menu, click modify. The Mark Choice Modify form appears.
Figure 892: Mark Choice Modify Form
1. Logic Operation List
2. Configure the following parameter(s) as required:
Parameter
logic-op
mark-value
modify-chain
Configuring a Save Mark
1. In the menu, click save. The Mark Choice Save form appears.
778
Description
Sets the mark on either a packet or a connection.
A mark that corresponds to a class mark (decimal value).
(optional) A mask to determine which mark bits will be set.
Synopsis: forward, postrouting, prerouting
Default: forward
A chain where the set operation will take place.
1
2
3
2. Mark Value Box 3. Modify Chain List
Description
Synopsis: and, or
A logical operation to perform on the current mark: AND/OR.
A mark to perform the operation with (decimal value).
Synopsis: forward, postrouting, prerouting
Default: forward
A chain in which the operation will take place.
RUGGEDCOM ROX II
User Guide
Configuring QoS Marking