RUGGEDCOM ROX II
User Guide
Figure 936: Key Settings Form
1. Label Box
2. Add Button
3.
Configure the following parameter(s) as required:
Parameter
label
4.
Click Add to add the cross-connect label. The Static MPLS Cross-Connects form appears.
Figure 937: Static MPLS Cross-Connects Form
1. Out Interface List
5.
Configure the following parameter(s) as required:
Parameter
Out Interface
Next Hop
Out Label
Adding a Static Cross-Connect
1
Description
The incoming label.
1
2
3
2. Next Hop Box
3. Out Label Box
Description
The outgoing interface.
Synopsis: The ip-address type represents an IP address and is IP version neutral.
The format of the textual representations implies the IP version.
The destination next-hop router (IPv4 or IPv6 format).
Synopsis: explicit-null, implicit-null,
Chapter 5
Setup and Configuration
2
811