Viewing A List Of Wan Interfaces; Configuring A Wan Interface - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Section 3.24.1

Viewing a List of WAN Interfaces

To view a list of WAN interfaces, navigate to interface » wan. The WAN Slot Port Settings table appears.
Figure 159: WAN Slot Port Settings Table
Section 3.24.2

Configuring a WAN Interface

To configure a WAN interface, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to interface » wan » {interface}, where {interface} is the WAN interface. The Enable WAN
Interface form appears.
Figure 160: Enable WAN Interface Form
1. Enabled Check Box
3. Configure the following parameter(s) as required:
Parameter
enabled
link-alarms
Viewing a List of WAN Interfaces
1
2
3
2. Link Alarms Check Box 3. Alias Box
Description
Default: false
Enables this WAN port.
Default: true
Chapter 3
Device Management
153