Adding A Vrrp Instance - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
If no VRRP instances have been configured, add instances as needed. For more information, refer to
Section 5.26.6.2, "Adding a VRRP
Section 5.26.6.2

Adding a VRRP Instance

To add a VRRP instance, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Make sure a VRRP group has been configured. For more information, refer to
VRRP Group".
3. Navigate to services » vrrp » instance and click <Add instance>. The Key Settings form appears.
Figure 686: Key Settings Form
1. Instance Name Box
4. Configure the following parameter(s) as required:
Parameter
Instance Name
5. Click Add to add the instance. The VRRP Instance form appears.
590
Instance".
1
2. Add Button
Description
The name of the VRRP instance - the name must not include spaces.
RUGGEDCOM ROX II
User Guide
Section 5.26.5.2, "Adding a
2
Adding a VRRP Instance