Chapter 5
Setup and Configuration
1
Figure 519: Entry Table
1. Add Button
2. Edit Button
Click Delete next to the chosen entry.
3.
4.
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5.
Click Exit Transaction or continue making changes.
Section 5.19.7
Managing Neighbors
Neighbors are other routers with which to exchange routes. One or more neighbors must be specified in order for
BGP to operate.
NOTE
If neighbors are specified but no networks are specified, the router will receive BGP routing information
from its neighbors but will not advertise any routes to them. For more information about networks, refer
to
Section 5.19.8, "Managing
The following sections describe how to configure and manage neighbors for dynamic BGP routes:
•
Section 5.19.7.1, "Viewing a List of Neighbors"
•
Section 5.19.7.2, "Adding a Neighbor"
•
Section 5.19.7.3, "Deleting a Neighbor"
Section 5.19.7.1
Viewing a List of Neighbors
To view a list of neighbors configured for a BGP network, navigate to routing » dynamic » bgp » neighbor. If
neighbors have been configured, the Neighbor table appears.
462
2
3
3. Delete Button
Networks".
RUGGEDCOM ROX II
User Guide
Managing Neighbors