Siemens RX1500 User Manual page 791

RUGGEDCOM ROX II
User Guide
2. Navigate to qos » traffic-control » basic-configuration » tcinterfaces, and click <Add tcinterfaces>. The
Key Settings form appears.
Figure 872: Key Settings Form
1. Interface Box
3. Configure the following parameter(s) as required:
Parameter
interface
4. Click Add to create the new traffic control interface. The Interface to Apply Traffic Control form appears.
Figure 873: Interface to Apply Traffic Control Form
1. Type List 2. Ingress Speed Box
5. Configure the following parameter(s) as required:
Adding a Traffic Control Interface
1
2. Add Button
Description
An interface to which traffic shaping will apply. Lowercase alphanumerical as well as '.'
and '-' characters are allowed.
1
2
3
4
5
3. Egress Speed Box 4. Unit for Egress Speed List
Setup and Configuration
2
5. Description Box
Chapter 5
759