RUGGEDCOM ROX II
User Guide
4.
On the Client Configuration form, configure the following parameters as required:
Parameter
unknown-client
shared-network
subnet
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
5.
to proceed.
Click Exit Transaction or continue making changes.
6.
Section 5.15.11.4
Configuring a Host Group Client
To configure a client for a host on the DHCP Server, do the following:
1.
Change the mode to Edit Private or Edit Exclusive.
2.
Navigate to services » dhcpserver » host-groups » {host} » options » client, where {host} is the name of
the host group. The Client Configuration, NIS Configuration and NetBios Configuration forms appear.
Configuring a Host Group Client
Description
Synopsis: allow, deny, ignore
Default: allow
The action to take for previously unregistered clients.
The shared network that this host group belongs to.
The subnet that this host group belongs to.
Chapter 5
Setup and Configuration
345