Chapter 5
Setup and Configuration
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
5.
to proceed.
6.
Click Exit Transaction or continue making changes.
Section 5.14.4
Deleting a DHCP Client Port
To delete a client port for the DHCP relay agent, do the following:
Change the mode to Edit Private or Edit Exclusive.
1.
2.
Navigate to switch » dhcp-relay-agent » dhcp-client-ports. The DHCP Relay Agent Client Ports table
appears.
1
Figure 327: DHCP Relay Agent Client Ports Table
1. Add Button
2. Edit Button
Click Delete next to the chosen client port.
3.
4.
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5.
Click Exit Transaction or continue making changes.
Section 5.15
Managing the DHCP Server
Dynamic Host Configuration Protocol (DHCP) is a method for centrally and consistently managing IP addresses
and settings for clients, offering a variety of assignment methods. IP addresses can be assigned based on the
Ethernet MAC address of a client either sequentially or by using port identification provided by a DHCP relay
agent device.
The information that is assigned to addresses in DHCP is organized to deal with clients at the interface, subnet,
pool, shared network, host-group and host levels.
The following sections describe how to configure and manage the DHCP server:
•
Section 5.15.1, "Configuring the DHCP Server"
•
Section 5.15.2, "Enabling/Disabling the DHCP Server"
310
2
3
3. Delete Button
RUGGEDCOM ROX II
User Guide
Deleting a DHCP Client Port