RUGGEDCOM ROX II
User Guide
Figure 22: Slot CPU/RAM Utilization Table
This table provides the following information:
Parameter
slot
detected-module
CPU load(%)
RAM Avail(%)
RAM Low(%)
Section 3.2.5
Viewing the Slot Status
To view the overall status of each slot, navigate to chassis » status. The Slot Status table appears.
Figure 23: Slot Status Table
This table provides the following information:
Parameter
slot
Detected Module
State
Viewing the Slot Status
Description
Synopsis: pm1, pm2, main, sm, lm1, lm2, lm3, lm4, lm5, lm6, cm, em, trnk
The slot name, as marked on the silkscreen across the top of the chassis.
The installed module's type specifier.
The CPU load, in percent, on the installed module.
The proportion of memory (RAM) currently unused, in percent, on the installed module.
The lowest proportion of unused memory (RAM), in percent, recorded for the installed
module since start-up.
Description
Synopsis: pm1, pm2, main, sm, lm1, lm2, lm3, lm4, lm5, lm6, cm, em, trnk
The slot name, as marked on the silkscreen across the top of the chassis.
The installed module's type specifier.
Synopsis: unknown, empty, disabled, resetting, operating, failed, disconnected
The current state of the installed module.
Chapter 3
Device Management
35