Siemens RX1500 User Manual page 98

Chapter 3
Device Management
1. If the source of the software is a USB Mass Storage drive, insert the drive in the USB port on the device.
2. Navigate to admin » rox-imaging and click roxflash in the menu. The ROXflash and Flash a ROXII image
to the other partition forms appear.
Figure 58: ROXflash Form
1. URL Box
Figure 59: Flash a ROXII image to the other partition Form
1. Perform Button
3. On the ROXflash form, configure the following parameters:
IMPORTANT!
For downgrades via HTTPS, the server's public key must be signed by a trusted Certificate
Authority (CA). A list of recognized CA's is available under /etc/ssl/certs/, which can be
accessed via the CLI. For more information about viewing the contents of a file via the CLI, refer to
the RUGGEDCOM ROX II v2.6 CLI User Guide.
Parameter
url
4. Click Perform. ROXflash begins to flash the software image to the inactive partition.
66
Description
The URL of the ROXII image to download. SFTP, FTP, HTTP, and HTTPS are supported
for the file transfer. To flash from a USB device, the format is 'usb://path-to-file-on-
system' and only one single partition is supported. For the rest of the protocols, the
format is 'protocol://user:password@host:port/path-to-file'. If your server does not
require authentication, you may omit 'user:password'. When using the default port for
the protocol, you may omit ':port'.
RUGGEDCOM ROX II
User Guide
Downgrading Using ROXflash