Siemens RX1500 User Manual page 308

Chapter 5
Setup and Configuration
Figure 285: Key Settings Form
1. Group Box 2. Security Model List
3. Configure the following parameter(s) as required:
Parameter
Group
Security Model
Security Level
Click Add to create the protocol. The SNMP Group Access Configuration screen appears.
4.
276
1
2
3
3. Security Level List
Description
The name of the SNMP group.
Synopsis: any, v1, v2c, v3
The SNMP security model to use: SNMPv1, SNMPv2c, or USM/SNMPv3.
Synopsis: noAuthNoPriv, authNoPriv, authPriv
The SNMP security level:
• authPriv: Communication with authentication and privacy.
• authNoPriv: Communication with authentication and without privacy.
• noAuthnoPriv: Communication without authentication and privacy.
4. Add Button
RUGGEDCOM ROX II
User Guide
4
Adding an SNMP Group