Managing Diagnostic Logs - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Figure 34: Trigger Action Form
1. Perform Button
Click Perform.
2.
Section 3.9.3

Managing Diagnostic Logs

Diagnostic logs are available for troubleshooting the device. Various device behaviour is recorded in the following
logs:
Log
Developer's Log
SNMP Log
NETCONF Summary Log
NETCONF Trace Log
XPATH Trace Log
WebUI Trace Log
CAUTION!
Configuration hazard – risk of reduced performance. Enabling diagnostic logging will significantly affect
the performance of ROX II. Only enable diagnostic logging when directed by Siemens.
The following sections describe how to configure and manage diagnostic logs:
• Section 3.9.3.1, "Enabling/Disabling the Developer's Log"
• Section 3.9.3.2, "Enabling/Disabling the SNMP Log"
• Section 3.9.3.3, "Enabling/Disabling the NETCONF Summary Log"
• Section 3.9.3.4, "Enabling/Disabling the NETCONF Trace Log"
• Section 3.9.3.5, "Enabling/Disabling the XPATH Trace Log"
• Section 3.9.3.6, "Enabling/Disabling the WebUI Trace Log"
Managing Diagnostic Logs
Filename
/var/log/confd-dev.log
/var/log/snmp-trace.log
/var/log/netconf.log
/var/log/netconf-trace.log
/var/log/xpath-trace.log
/var/log/webui-trace.log
Chapter 3
Device Management
1
45