Deleting An Snmp Security Model - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Figure 282: SNMP Security Model to Group Mapping Form
1. Group Box
5. Configure the following parameter(s) as required:
Parameter
Group
6. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
7. Click Exit Transaction or continue making changes.
Section 5.11.8.3

Deleting an SNMP Security Model

To delete an SNMP security model, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to admin » snmp » snmp-security-to-group. The SNMP Security Model to Group Mapping
table appears.
1
Figure 283: SNMP Security Model to Group Mapping Table
1. Add Button 2. Edit Button
274
1
Description
Default: all-rights
The name of the SNMP group.
2 3
3. Delete Button
RUGGEDCOM ROX II
User Guide
Deleting an SNMP Security Model