Siemens RX1500 User Manual page 474

Chapter 5
Setup and Configuration
Figure 489: Key Settings Form
1. Sequence Number Box
4. Configure the following parameter(s) as required:
Parameter
Sequence Number
5. Click Add to create the new entry. The Route Map Entry form appears.
Figure 490: Route Map Entry Form
1. Action List 2. Call Route Map List
6. Configure the following parameter(s) as required:
Parameter
Action
Call Route Map
On Match Goto
442
1
2. Add Button
Description
The sequence number of the route-map entry.
1
2
3
3. On Match Goto List
Description
Synopsis: deny, permit
Default: permit
Action.
Jump to another route-map after match+set.
Go to this entry on match.
RUGGEDCOM ROX II
User Guide
2
Adding a Route Map Filter Entry