Siemens RX1500 User Manual page 368

Chapter 5
Setup and Configuration
Figure 360: Client Configuration Form
1. Fixed IP Box
3. On the Hardware Configuration form, configure the following parameters as required:
Parameter
type
mac
4. On the Leased Configuration form, configure the following parameters as required:
Parameter
default
maximum
5. On the Client Configuration form, configure the following parameters as required:
Parameter
fixed-ip
unknown-client
shared-network
336
1
2
3
4
5
2. Unknown Client LIst 3. Shared Network LIst
Description
Synopsis: fddi, token-ring, ethernet
Default: ethernet
The type of network hardware used by the client, associated with the host entry.
The physical network address of the client. Note that this corresponds to the hardware
type; for example, the MAC address for the ethernet.
Description
Default: 600
The minimum leased time in seconds that the server offers to the client.
Default: 7200
The maximum leased time in seconds that the server offers to the clients.
Description
The IP address that the server assigns to the matching client.
Synopsis: allow, deny, ignore
The action to take for previously unregistered clients.
The shared-network that this host belongs to.
4. Subnet LIst 5. Host Groups LIst
RUGGEDCOM ROX II
User Guide
Configuring Host Options