Viewing A List Of Port Costs And Priorities; Adding Port Costs And Priorities - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Section 5.34.9.1

Viewing a List of Port Costs and Priorities

To view a list of the port costs and priorities configured for switched Ethernet ports or Ethernet trunk interfaces,
navigate to:
• For switched Ethernet ports:
interface » switch » {interface} » spanning-tree » msti, where {interface} is the switched Ethernet port.
• For Ethernet trunk interfaces:
interface » trunks » {id} » spanning-tree » msti, where {id} is the ID given to the interface.
The MSTI Configuration table appears.
Figure 830: MSTI Configuration Table
If no port costs or priorities have been configured, add them as needed. For more information, refer to
Section 5.34.9.2, "Adding Port Costs and
Section 5.34.9.2

Adding Port Costs and Priorities

To add port costs and priorities for a switched Ethernet port or an Ethernet trunk interface, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to:
• For switched Ethernet ports:
interface » switch » {interface} » spanning-tree » msti, where {interface} is the switched Ethernet port.
• For Ethernet trunk interfaces:
interface » trunks » {id} » spanning-tree » msti, where {id} is the ID given to the interface.
3. Click <Add msti> in the menu. The Key Settings form appears.
718
Priorities".
RUGGEDCOM ROX II
Viewing a List of Port Costs and Priorities
User Guide