Adding Esp Algorithms; Deleting Esp Algorithms - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Section 5.28.8.3

Adding ESP Algorithms

To add a new algorithm for the Encapsulated Security Payload (ESP) protocol, do the following:
Change the mode to Edit Private or Edit Exclusive.
1.
2. Navigate to tunnel » ipsec » connection » {connection} » esp » algorithm, where {connection} is the
name of the connection.
3. Click <Add agorithm>. The Key Settings form appears.
Figure 735: Key Settings Form
1. Cipher Algorithm Box
4. Configure the following parameter(s) as required:
Parameter
Cipher Algorithm
Hash Method
5. Click Add to create the new algorithm.
6. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
Click Exit Transaction or continue making changes.
7.
Section 5.28.8.4

Deleting ESP Algorithms

To delete an algorithm for the Encapsulated Security Payload (ESP) protocol, do the following:
Change the mode to Edit Private or Edit Exclusive.
1.
630
1
2
2. Hash Method Box 3. Add Button
Description
Synopsis: 3des, aes, aes256, aes192, aes128, any
The cipher algorithm. The default value is '3des' or 'aes' unless overwritten by the
default connection setting.
Synopsis: sha1, md5, any
The hash method. The default value is 'sha1' or 'md5' unless overwritten by the default
connection setting.
RUGGEDCOM ROX II
User Guide
3
Adding ESP Algorithms