Managing Ip Addresses For Routable Interfaces; Configuring Costing For Routable Interfaces - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Section 5.38

Managing IP Addresses for Routable Interfaces

The following sections describe how to configure and manage IP addresses for routable interfaces:
• Section 5.38.1, "Configuring Costing for Routable Interfaces"
• Section 5.38.2, "Viewing Statistics for Routable Interfaces"
• Section 5.38.3, "Managing IPv4 Addresses"
• Section 5.38.4, "Configuring IPv6 Neighbor Discovery"
• Section 5.38.5, "Managing IPv6 Network Prefixes"
• Section 5.38.6, "Managing IPv6 Addresses"
Section 5.38.1

Configuring Costing for Routable Interfaces

To configure the costing for a routable interface, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to ip » {interface}, where {interface} is the name of the routable interface. The Routable
Interfaces form appears.
Figure 906: Routable Interfaces Form
1. Auto-Cost Bandwidth Box
3. Configure the following parameter(s) as required:
Parameter
Auto-Cost Bandwidth (kbps)
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
788
1
Description
Default: 10000
This value is used in auto-cost calculations for this routable logical interface in kbps.
Managing IP Addresses for Routable Interfaces
RUGGEDCOM ROX II
User Guide