Deleting A Virtual Switch Vlan; Managing Vlan Ids - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
7. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
8. Click Exit Transaction or continue making changes.
Section 5.35.7.3

Deleting a Virtual Switch VLAN

To delete a virtual switch VLAN, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to interface » virtualswitch » {id} » vlan, where {id} is the ID assigned to the virtual switch. The
VLAN table appears.
1
Figure 856: VLAN Table
1. Add Button
3. Click Delete next to the chosen VLAN.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.35.8

Managing VLAN IDs

The following sections describe how to configure and manage VLAN IDs for routable Ethernet ports and virtual
switches:
• Section 5.35.8.1, "Viewing a List of VLAN IDs for Routable Ethernet Ports and Virtual Switches"
• Section 5.35.8.2, "Viewing a List of VLAN IDs for T1/E1 Lines"
• Section 5.35.8.3, "Adding a VLAN ID to a Routable Ethernet Port or Virtual Switch"
• Section 5.35.8.4, "Adding a VLAN ID to a T1/E1 Line"
• Section 5.35.8.5, "Deleting a VLAN ID for a Routable Ethernet Port or Virtual Switch"
• Section 5.35.8.6, "Deleting a VLAN ID for a T1/E1 Line"
Deleting a Virtual Switch VLAN
2
2. Edit Button 3. Delete Button
3
Chapter 5
Setup and Configuration
743