Managing Mac Addresses; Viewing A Dynamic List Of Mac Addresses - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
1
Figure 806: DSCP to CoS Mapping Table
1. Add Button
3. Click Delete next to the chosen DSCP.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.33

Managing MAC Addresses

The following sections describe how to configure and manage MAC addresses:
• Section 5.33.1, "Viewing a Dynamic List of MAC Addresses"
• Section 5.33.2, "Purging the Dynamic MAC Address List"
• Section 5.33.3, "Configuring MAC Address Learning Options"
• Section 5.33.4, "Managing Static MAC Addresses"
Section 5.33.1

Viewing a Dynamic List of MAC Addresses

To view a dynamic list of learned and statically configured MAC addresses, navigate to switch » mac-tables »
mac-table. If MAC addresses have been learned, the MAC Address Table appears.
Managing MAC Addresses
2 3
2. Edit Button 3. Delete Button
Chapter 5
Setup and Configuration
687