Deleting Hosts - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Parameter
server
domain
5. On the NetBios Configuration form, configure the following parameters as required:
Parameter
scope
nameserver
6. If custom configuration settings are required for the host client, refer to
Host Client Configurations".
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
7.
to proceed.
Click Exit Transaction or continue making changes.
8.
Section 5.15.9.5

Deleting Hosts

To delete a host, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
Navigate to services » dhcpserver » hosts. The Host Configuration table appears.
2.
1
Figure 364: Host Configuration Table
1. Add Button
3. Click Delete next to the chosen host.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
Deleting Hosts
Description
The NIS server address that the DHCP server offers to the client when it issues the
lease to the client.
The NIS domain name that the DHCP server offers to the client when it issues the lease
to the client.
Description
Default: netbios
The NetBIOS scope that the DHCP server offers to the client when it issues the lease to
the client.
Default: 127.0.0.1
The NetBIOS name server that the DHCP server offers to the client when it issues the
lease to the client.
2 3
2. Edit Button 3. Delete Button
Setup and Configuration
Section 5.15.10, "Managing Custom
Chapter 5
339