Deleting A Remote Server Selector - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Parameter
negate
comparison
level
facility-list
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
7.
to proceed.
Click Exit Transaction or continue making changes.
8.
Section 3.9.5.3

Deleting a Remote Server Selector

To delete a remote server selector, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
Navigate to admin » logging » server » {address} » selector, where {address} is the IP address of the
2.
remote server. The Remote Server Selector table appears.
Deleting a Remote Server Selector
Description
Excludes messages defined in the Remote Server Selector fields from the log. Selecting
this option acts as a logical NOT for the selector definition.
For example: Selecting same, debug, and mail in the Comparison, Level, and Facility-
list fields includes debug messages from the mail subsystem in the log. Selecting
Negate excludes debug messages from the mail subsystem from the log.
Synopsis: same_or_higher, same
Default: same_or_higher
The message severity levels to include in the log:
• same: includes only messages of the severity level selected in the Level field.
• same_or_higher: includes messages of the severity level selected in the Level field,
and all messages of higher severity.
For example:
• Selecting debug in the Level field and same in the Comparison field includes only
debug messages in the log.
• Selecting debug in the Level field and same_or_higher in the Comparison field
includes debug and all higher severity messages in the log.
Synopsis: emerg, alert, crit, err, warning, notice, info, debug, none, all
Default: all
The base message severity level to include in the log. all includes all messages. none
excludes all messages. Other levels are listed in order of increasing severity.
Synopsis: auth, authpriv, cron, daemon, ftp, kern, lpr, mail, news, security, syslog,
user, uucp, local0, local1, local2, local3, local4, local5, local6, local7, all
Synopsis: "facility-list" occurs in an array of at least 1 and at most 8 elements
The subsystems generating log messages. Messages from the selected subusystems
are included in the log. At least one subsystem must be selected; up to 8 subsystems
can be selected.
Chapter 3
Device Management
55