Viewing The Goose Tunnel Statistics; Viewing A List Of Goose Tunnels; Adding A Goose Tunnel - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Section 5.29.5.1

Viewing the GOOSE Tunnel Statistics

To view the GOOSE tunnel statistics, navigate to tunnel » l2tunneld » status » goose. The GOOSE Tunnel
Statistics form appears.
1
Figure 760: GOOSE Tunnel Statistics Form
1. Tunnel Name 2. Interface Name
This table provides the following information:
Parameter
tunnel-name
Section 5.29.5.2

Viewing a List of GOOSE Tunnels

To view a list of GOOSE tunnels, navigate to tunnel » l2tunneld » goose. If tunnels have been configured, the
GOOSE Tunnel table appears.
Figure 761: GOOSE Tunnel Table
If no GOOSE tunnels have been configured, add tunnels as needed. For more information, refer to
Section 5.29.5.3, "Adding a GOOSE
Section 5.29.5.3

Adding a GOOSE Tunnel

To configure a GOOSE tunnel, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to tunnel » l2tunneld » goose and click <Add tunnel>. The Key Settings form appears.
Viewing the GOOSE Tunnel Statistics
2 3 4
3. MAC 4. RX Frames
Description
The GOOSE tunnel name.
Tunnel".
5 6 7 8
5. TX Frames 6. RX Characters
Setup and Configuration
7. TX Characters 8. Errors
Chapter 5
649