Chapter 5
Setup and Configuration
Click Exit Transaction or continue making changes.
5.
Section 5.26.8
Managing Track Scripts
Track scripts are used to associate VRRP trackers with VRRP instances.
The following sections describe how to configure and manage track scripts:
•
Section 5.26.8.1, "Viewing a List of Track Scripts"
•
Section 5.26.8.2, "Adding a Track Script"
•
Section 5.26.8.3, "Deleting a Track Script"
Section 5.26.8.1
Viewing a List of Track Scripts
To view a list of track scripts, navigate to services » vrrp » instance » {name} » track-script, where {name} is
the name of the VRRP instance. If track scripts have been configured, the Track Script table appears.
Figure 693: Track Script Table
If no VRRP monitors have been configured, add monitors as needed. For more information, refer to
Section 5.26.7.2, "Adding a VRRP
Section 5.26.8.2
Adding a Track Script
To add a track script, do the following:
Change the mode to Edit Private or Edit Exclusive.
1.
2.
Navigate to services » vrrp » instance » {name} » track-script, where {name} is the name of the VRRP
instance.
3.
Click <Add track-script>. The Key Settings form appears.
596
Monitor".
RUGGEDCOM ROX II
User Guide
Managing Track Scripts