Siemens RX1500 User Manual page 195

RUGGEDCOM ROX II
User Guide
Figure 171: Key Settings Form
1. Channel Number Box
4. Configure the following parameter(s) as required:
Parameter
Channel Number
5. Click Add to create the new channel. The T1/E1 Time Slot Settings form appears.
Figure 172: T1 Time Slot Settings Form
1. T1 Time Slots Box
6. Configure the following parameter(s) as required:
Parameter
T1 Time Slots
7. If necessary, configure VLANs for an HDLC-ETH connection. For more information, refer to
"Adding an HDLC-ETH
8. If necessary, configure an MLPPP connection. For more information, refer to
Multi Link PPP
Adding a Channel
1
2. Add Button
Description
Channel Number.
1
Description
Default: all
Time slots for this channel. Format: the string 'all', or a comma-separated list of numbers
in the range of 1 to 24.
To specify a range of numbers, separate the start and end of the range with '..' or with a
hyphen '-'
Example 1: 1,2,3 and 1..3 both represent time slots 1 through 3.
Example 2: 1,2,5..10,11 represents time slots 1, 2, 5, 6, 7, 8, 9, 10, and 11.
VLAN".
Connection".
Device Management
2
Section 5.35.6.2,
Section 3.24.11, "Configuring a
Chapter 3
163