Deleting A Key Chain; Deleting A Key - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Section 5.20.9.5

Deleting a Key Chain

To delete a key chain for dynamic RIP routes, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
Navigate to routing » dynamic » rip » key-chain. The Key Chain Management table appears.
2.
1
Figure 573: Key Chain Management Table
1. Add Button
3. Click Delete next to the chosen key chain.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.20.9.6

Deleting a Key

To delete a key from a key chain, do the following:
Change the mode to Edit Private or Edit Exclusive.
1.
2. Navigate to routing » dynamic » rip » key-chain » {name} » key, where {name} is the name of the key
chain. The Key Configuration table appears.
1
Figure 574: Key Configuration Table
1. Add Button
Deleting a Key Chain
2 3
2. Edit Button 3. Delete Button
2 3
2. Edit Button 3. Delete Button
Chapter 5
Setup and Configuration
501