Configuring Host Options - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Section 5.15.9.3

Configuring Host Options

To configure options for a host on the DHCP server, do the following:
NOTE
Options set at the host level override options set at the DHCP server level.
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to services » dhcpserver » hosts » {host} » options, where {host} is the name of the host. The
Hardware Configuration, Leased Configuration and Client Configuration forms appear.
Figure 358: Hardware Configuration Form
1. Type List 2. MAC Box
Figure 359: Leased Configuration Form
1. Default Box
Configuring Host Options
1
2
1
2
2. Maximum Box
Chapter 5
Setup and Configuration
335