Managing Hosts; Viewing A List Of Hosts - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
1
Figure 418: Main Interface Settings Table
1. Add Button 2. Edit Button
3. Click Delete next to the chosen interface.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
Click Exit Transaction or continue making changes.
5.
Section 5.17.10

Managing Hosts

Hosts are used to assign zones to individual hosts or subnets (if the interface supports multiple subnets). This
allows the firewall to receive a packet and then redirect it to the same device that received it. This is functionality
is useful for VPN setups to handle the VPN traffic separately from the other traffic on the interface which carries
the VPN traffic.
Table: Example
Zone
Local
Guests
The following sections describe how to configure and manage hosts for a firewall:
• Section 5.17.10.1, "Viewing a List of Hosts"
• Section 5.17.10.2, "Adding a Host"
• Section 5.17.10.3, "Deleting a Host"
Section 5.17.10.1

Viewing a List of Hosts

To view a list of hosts, navigate to security » firewall » fwconfig » {firewall} » fwhost, where {firewall} is the
name of the firewall. If hosts have been configured, the Main Host Settings table appears.
384
2 3
3. Delete Button
Interface
Switch.0003
Switch.0003
RUGGEDCOM ROX II
IP Address or Network
10.0.0.0/8
192.168.0.0/24
Managing Hosts
User Guide