Configuring The Device - Siemens SIMATIC NET RUGGEDCOM M969 Equipment Manual

Device Management
3.2 Configuring the Device
device's IP address. The factory default IP address for the RUGGEDCOM M969 is
https://192.168.0.1.
For more information about available ports, refer to "Communication
Ports" (Page 21).
3.2

Configuring the Device

Once the device is installed and connected to the network, it must be configured.
All configuration management is done via the RUGGEDCOM M969 interface. For
more information about configuring the device, refer to the "RUGGEDCOM M969
Configuration Manual" associated with the installed software release.
20
RUGGEDCOM M969
Equipment Manual, 10/2023, C79000-G8976-1039-05