Managing Vlans For Virtual Switches; Viewing A List Of Virtual Switch Vlans - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
1
Figure 852: Ethernet Over HDLC VLAN Settings Table
1. Add Button
Click Delete next to the chosen VLAN.
3.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.35.7

Managing VLANs for Virtual Switches

The following sections describe how to configure and manage VLANs for virtual switch interfaces:
• Section 5.35.7.1, "Viewing a List of Virtual Switch VLANs"
• Section 5.35.7.2, "Adding a Virtual Switch VLAN"
• Section 5.35.7.3, "Deleting a Virtual Switch VLAN"
Section 5.35.7.1

Viewing a List of Virtual Switch VLANs

To view a list of virtual switch VLANs, navigate to interface » virtualswitch » {id} » vlan, where {id} is the ID
assigned to the virtual switch. If VLANs have been configured, the VLAN table appears.
Figure 853: VLAN Table
If no virtual switch VLANs have been configured, add VLANs as needed. For more information, refer to
Section 5.35.7.2, "Adding a Virtual Switch
Managing VLANs for Virtual Switches
2. Edit Button 3. Delete Button
VLAN".
2 3
Chapter 5
Setup and Configuration
741