Chapter 5
Setup and Configuration
Navigate to switch » mcast-filtering » static-mcast-table. The Static Multicast Summary table appears.
2.
1
Figure 668: Static Multicast Summary Table
1. Add Button
2. Edit Button
3.
Click Delete next to the chosen table entry.
4.
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5.
Click Exit Transaction or continue making changes.
Section 5.25.6
Managing Egress Ports for Multicast Groups
The following sections describe how to configure and manage egress ports for multicast groups:
•
Section 5.25.6.1, "Viewing a List of Egress Ports"
•
Section 5.25.6.2, "Adding an Egress Port"
•
Section 5.25.6.3, "Deleting an Egress Port"
Section 5.25.6.1
Viewing a List of Egress Ports
To view a list of egress ports for a static multicast group defined in the Static Multicast Group Summary table,
navigate to switch » mcast-filtering » static-mcast-table » {id/address} » egress-ports, where {id/address}
is the VLAN ID for the static multicast group and the MAC address for the host device. If egress ports have been
configured, the Egress Ports table appears.
Figure 669: Egress Ports Table
576
2
3
3. Delete Button
Managing Egress Ports for Multicast Groups
RUGGEDCOM ROX II
User Guide