Adding A Host - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Figure 356: Host Configuration Table
If no hosts have been configured, add hosts as needed. For more information, refer to
a Host".
Section 5.15.9.2

Adding a Host

To add a host to the DHCP server, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to services » dhcpserver » hosts and click <Add host>. The Key Settings form appears.
Figure 357: Key Settings Form
1. Name Box 2. Add Button
3. Configure the following parameter(s) as required:
Parameter
name
Click Add to create the new host.
4.
5. Configure options for the host. For more information, refer to
6. Configure the client for the host. For more information, refer to
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
7.
to proceed.
Click Exit Transaction or continue making changes.
8.
334
1
Description
The unique name to refer to the host within a DHCP configuration.
Section 5.15.9.2, "Adding
Section 5.15.9.3, "Configuring Host
Section 5.15.9.4, "Configuring a Host
RUGGEDCOM ROX II
User Guide
2
Options".
Client".
Adding a Host