Chapter 5
Setup and Configuration
Figure 508: Key Settings Form
1. Name Box
2. Add Button
3.
Configure the following parameter(s) as required:
Parameter
Name
Click Add to create the new prefix-list. The Prefix List form appears.
4.
Figure 509: Prefix List Form
1. Description Box
5.
Configure the following parameter(s) as required:
Parameter
Description
6.
Add prefix entries as needed. For more information, refer to
7.
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
Click Exit Transaction or continue making changes.
8.
Section 5.19.5.4
Adding a Prefix Entry
To add an entry for a dynamic BGP prefix list, do the following:
Change the mode to Edit Private or Edit Exclusive.
1.
454
1
Description
The name of the prefix list.
1
Description
The description of the prefix list.
Section 5.19.5.4, "Adding a Prefix
RUGGEDCOM ROX II
User Guide
2
Entry".
Adding a Prefix Entry