RUGGEDCOM ROX II
User Guide
Section 5.21.10.3
Deleting a Message Digest Key
To delete a message digest key from an OSPF routing interface, do the following:
1.
Change the mode to Edit Private or Edit Exclusive.
Navigate to routing » dynamic » ospf » interface » {name} » message-digest-key, where {name} is the
2.
name of the routing interface. The Message Digest table appears.
1
Figure 622: Message Digest Table
1. Add Button
3.
Click Delete next to the chosen key.
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
4.
to proceed.
Click Exit Transaction or continue making changes.
5.
Section 5.22
Managing Static Routing
Static routes can be manually added to the routing table when there are no notifications sent by other routers
regarding network topology changes.
The following sections describe how to configure and manage static routes:
•
Section 5.22.1, "Viewing a List of Static Routes"
•
Section 5.22.2, "Adding an IPv4 Static Route"
•
Section 5.22.3, "Adding an IPv6 Static Route"
•
Section 5.22.4, "Deleting a Static Route"
•
Section 5.22.5, "Configuring a Black Hole Connection for an IPv4 Static Route"
•
Section 5.22.6, "Managing Gateways for Static Routes"
•
Section 5.22.7, "Managing Interfaces for Static Routes"
Deleting a Message Digest Key
2
3
2. Edit Button
3. Delete Button
Chapter 5
Setup and Configuration
537