Siemens RX1500 User Manual page 190

Chapter 3
Device Management
Figure 165: Loopback Test Form
1. Interface List
Figure 166: Trigger Action Form
1. Perform Button
3. On the Loopback Test form, configure the following parameter(s) as required:
Parameter
physical-name
type
nloops
duration
4. On the Trigger Action form, click Perform. The results are displayed when the test is complete.
158
1
2
3
4
2. Type List 3. Nloops Box
Description
Physical interface name.
Synopsis: digital, remote, line
The loopback type.
Default: 10
The number of loops.
Default: 20
The number of seconds required to run the test.
4. Duration Box
RUGGEDCOM ROX II
User Guide
1
Performing a Loopback Test