Siemens RX1500 User Manual page 265

RUGGEDCOM ROX II
User Guide
Parameter
Job Name
4. Click Add. The Scheduled Jobs form appears.
Figure 249: Key Settings Form
1. Job Type List
5. Configure the following parameter(s) as required:
Parameter
Job Type
Minute
Adding Scheduled Jobs
Description
The name of the scheduled job. The name can be up to 64 characters in length.
2. Minute Box 3. Hour Box
Description
Synopsis: configchange, periodic
Default: periodic
Determines when to launch the scheduled job:
• periodic: The job launches at a set date and time.
• configchange: The job launches when the configuration changes.
Default: 0
For periodic jobs, sets the minutes portion of the job launch time. Valid values are in
the range of 0 to 59. If no value is set, the scheduler uses the default value of 0 and
launches the job every hour on the the hour.
• To specify a single value, enter the value in the field. For example, to launch the job
10 minutes past the hour, enter 10.
4. Day of Month Box 5. Month Box
System Administration
6. Day of Week Box 7. Command Box
Chapter 4
233