Chapter 5
Setup and Configuration
Figure 631: Key Settings Form
1. Gateway Address Box
4.
Configure the following parameter(s) as required:
Parameter
Gateway Address
5.
Click Add to add the gateway address. The Static Route Using Gateway form appears.
Figure 632: Static Route Using Gateway Form
1. Distance Box
6.
Configure the following parameter(s) as required:
Parameter
Distance (optional)
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
7.
to proceed.
Click Exit Transaction or continue making changes.
8.
Section 5.22.6.4
Deleting a Gateway for an IPv4 Static Route
To delete a gateway for an IPv4 static route, do the following:
Change the mode to Edit Private or Edit Exclusive.
1.
544
1
2. Add Button
Description
The gateway for the static route.
1
Description
The distance for the static route.
2
Deleting a Gateway for an IPv4 Static Route
RUGGEDCOM ROX II
User Guide