Deleting A Track Script - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Figure 694: Key Settings Form
1. Tracker Box
4. Configure the following parameter(s) as required:
Parameter
Tracker
5. Click Add to add the track script. The Track Script form appears.
Figure 695: Track Script Form
1. Weight Box
6. Configure the following parameter(s) as required:
Parameter
Weight
7. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
8. Click Exit Transaction or continue making changes.
Section 5.26.8.3

Deleting a Track Script

To delete a track script, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
Deleting a Track Script
1
2. Add Button
Description
Select a tracker to monitor VRRP instance.
1
Description
This setting overwrites the weight setting in the tracker. If negative, the priority
decreases by this amount when the tracker falls. If positive, the priority increases by this
amount when the tracker rises. If not set, the weight value in the tracker will be used.
Chapter 5
Setup and Configuration
2
597