Deleting A Virtual Switch - Siemens RX1500 User Manual

Chapter 3
Device Management
Parameter
Enabled
Forward Delay
Alias
IP Address Source
ProxyARP
6. Add interfaces for the virtual switch. For more information, refer to
Interface".
7. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
8. Click Exit Transaction or continue making changes.
Section 3.25.3

Deleting a Virtual Switch

To delete a virtual switch, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to interface » virtualswitch. The Virtual Switch table appears.
1
Figure 186: Virtual Switch Table
1. Add Button 2. Edit Button
3. Click Delete next to the chosen switch.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
176
Description
Default: true
Enables this interface.
Default: 15
Delay (in seconds) of the listening and learning state before goes to forwarding state.
The SNMP alias name of the interface
Synopsis: static, dynamic
Default: static
Whether the IP address is static or dynamically assigned via DHCP or BOOTP.
Enables/Disables whether the port will respond to ARP requests for hosts other than
itself
3. Delete Button
Section 3.25.4.2, "Adding a Virtual Switch
2 3
Deleting a Virtual Switch
RUGGEDCOM ROX II
User Guide