Deleting An Aggregate Address; Managing Aggregate Address Options; Viewing A List Of Aggregate Address Options - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Section 5.19.9.3

Deleting an Aggregate Address

To delete an aggregate address for dynamic BGP routes, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
Navigate to routing » dynamic » bgp » aggregate-address. The Aggregate Network table appears.
2.
1
Figure 531: Aggregate Network Table
1. Add Button
3. Click Delete next to the chosen address.
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
4.
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.19.10

Managing Aggregate Address Options

The following sections describe how to configure and manage options for aggregate addresses:
• Section 5.19.10.1, "Viewing a List of Aggregate Address Options"
• Section 5.19.10.2, "Adding an Aggregate Address Option"
• Section 5.19.10.3, "Deleting an Aggregate Address Option"
Section 5.19.10.1

Viewing a List of Aggregate Address Options

To view a list of options for an aggregate address, navigate to routing » dynamic » bgp » aggregate-address »
{address} » options, where {address} is the subnet address and prefix for the aggregate address. If options
have been configured, the Aggregate Network Options table appears.
Deleting an Aggregate Address
2 3
2. Edit Button 3. Delete Button
Chapter 5
Setup and Configuration
471