Configuring A Shared Network Client - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Parameter
maximum
4. On the Client Configuration form, configure the following parameters as required:
Parameter
unknown-client
authorize-server
option82
5. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
6. Click Exit Transaction or continue making changes.
Section 5.15.6.4

Configuring a Shared Network Client

To configure the client for a shared network on the DHCP server, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to services » dhcpserver » shared-network{shared network} » options » client, where {shared
network} is the name of the shared network. The Client Configuration, NIS Configuration and NetBios
Configuration forms appear.
Configuring a Shared Network Client
Description
The minimum leased time in seconds that the server offers to the client.
Default: 7200
The maximum leased time in seconds that the server offers to the clients.
Description
Synopsis: allow, deny, ignore
The action to take for previously unregistered clients.
Enables/disables the server's authorization on this client. If enabled, the server will send
deny messages to the client that is trying to renew the lease, which the server knows the
client shouldn't have.
Enables/disables the NAK of option 82 clients for this subnet.
Chapter 5
Setup and Configuration
319