Siemens RX1500 User Manual page 469

RUGGEDCOM ROX II
User Guide
Figure 483: BGP Configuration
1. Enable BGP Check Box
Box 5. Deterministic MED Check Box
In the Distance form, configure the following parameters:
3.
Parameter
External Routes Distance
Internal Routes Distance
Local Routes Distance
4. In the BGP Configuration form, configure the following parameters:
Parameter
Enable BGP
Autonomous System ID
Always compare MED
Default Local Preference
Deterministic Med
Configuring BGP
1
2
3
4
5
6
2. Autonomous System ID Box
6. Router ID Box
Description
Distance value for external routes.
Prerequisite: external, internal and local must all be empty or all be configured.
Distance value for internal routes.
Prerequisite: external, internal and local must all be empty or all be configured.
Distance value for local routes.
Prerequisite: external, internal and local must all be empty or all be configured.
Description
Enables BGP.
Autonomous System ID.
Always comparing MED from different neighbors.
Default: 100
Default local preference value.
Pick the best-MED path among paths advertised from neighboring AS.
3. Always Compare MED Check Box
Chapter 5
Setup and Configuration
4. Default Local Preference
437