Viewing Ppp Interface Statistics - Siemens RX1500 User Manual

Chapter 3
Device Management
Figure 146: Cellular Modem Interfaces Form
1. State List 2. Media
This table provides the following information:
Parameter
state
media
admin-state
Section 3.23.3

Viewing PPP Interface Statistics

To view the statistics for the PPP interface, navigate to interfaces » cellmodem » {slot/port/profile}, where
{slot/port/profile} is the slot name, port number and profile configured for the cellular modem. The PPP Interfaces
Statistics form appears.
142
1
2
3. Admin State List
Description
Synopsis: up, down, testing, unknown, dormant, notPresent, lowerLayerDown
The port's link status.
The type of port media { ***range of values** }. It provides the user with a description of the
installed media type on the port for modular products. Please note that fiber media may
be either Single Mode(SM), Multi Mode(MM), and may be Short Distance, Long Distance
or Very Long Distance with connectors like LC, SC, ST, MTRJ etc. For the modules with
SFP/GBICs, the media description is displayed per the SFF-8472 specification, if the
transceiver is plugged into the module. E.g. 10/100/1000TX RJ45, 100FX SM SC, 10FX MM
ST,1000SX SFP LC S SL M5.
Synopsis: up, down, testing, unknown, dormant, notPresent, lowerLayerDown
The port's administrative status.
RUGGEDCOM ROX II
User Guide
Viewing PPP Interface Statistics