Deleting A Routing Map Filter Entry - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
1
Figure 604: Route Map Table
1. Add Button
3. Click Delete next to the chosen filter.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.21.6.6

Deleting a Routing Map Filter Entry

To delete an entry for a route map filter, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to routing » dynamic » ospf » filter » route-map » {tag} » entry, where {tag} is the tag for the
route map filter. The Route Map Entry table appears.
1
Figure 605: Route Map Entry Table
1. Add Button
3. Click Delete next to the chosen entry.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Deleting a Routing Map Filter Entry
2 3
2. Edit Button 3. Delete Button
2. Edit Button 3. Delete Button
2 3
Chapter 5
Setup and Configuration
525